No products in the cart.
Integrated Circuits (IC's)
Showing 25–48 of 78 resultsSorted by popularity
- 40XX Series IC's
IC 4016 – Quad Bilateral Switch
The IC 4016 is a quad 4-input analog multiplexer/demultiplexer, part of the 4000 series CMOS logic family. It allows multiple analog or digital signals to be routed through a single output or input, depending on the configuration. This IC is used for signal switching and routing in various electronic circuits, offering flexibility in handling multiple data paths with a single device.
SKU: ic-4016 - 40XX Series IC's
IC 4011 – Quad 2-Input NAND Gate
The IC 4011 is a quad 2-input NAND gate, part of the 4000 series CMOS logic family. It includes four independent NAND gates, each with two inputs, designed to perform logical NAND operations. This IC is used in digital circuits for creating complex logic functions, signal processing, and implementing various logical operations efficiently.
SKU: ic-4011 - Generic Integrated Circuits
HT12D: 16-Pin Serial Interface Decoder IC (Pack of 2)
The IC HT12D is a 16-pin decoder for use in communication systems, often paired with the HT12E encoder. It converts serial data received from the HT12E into parallel data outputs. The HT12D supports 8-bit data and address settings, and includes additional control functions like enable pins and output drivers. It is commonly used in remote control systems, RF communication modules, and data transmission applications to decode and interpret serial data into a usable parallel format for further processing.
SKU: ic-ht12d - Generic Integrated Circuits
IC MAX232: Dual-Channel RS-232 Line Driver/Receiver IC (Pack of 2)
The IC MAX232 is a dual RS-232 line driver/receiver, commonly used for serial communication. It converts signals between the RS-232 serial communication standard and TTL logic levels. The MAX232 includes built-in charge pumps to generate the necessary voltages for RS-232 communication, simplifying the design and implementation of serial interfaces in electronic systems. It is widely used in UART (Universal Asynchronous Receiver/Transmitter) applications and serial communication between microcontrollers and peripheral devices.
SKU: ic-max232 - 74XX Series IC's
IC 7440 – Dual 4-Input NAND Gate with Open-Collector Outputs
The IC 7440 is a quad 2-input NAND gate with open-collector outputs, part of the 7400 series TTL logic family. It contains four independent NAND gates, each with two inputs, and features open-collector outputs that can be used for wired-AND configurations. This IC is useful in digital logic applications for creating complex logic functions and for interfacing with other digital components.
SKU: ic-7440 - 74XX Series IC's
IC 74374 – Octal D-Type Flip-Flop with 3-State Outputs
The IC 74374 is an octal D-type flip-flop with 3-state outputs, part of the 7400 series TTL logic family. It includes eight independent D flip-flops, each with a data input (D), clock input (CLK), and output enable (OE) control. The 3-state outputs allow for flexible data bus interfacing and buffering in digital circuits, making it suitable for data storage, transfer, and manipulation applications.
SKU: ic-74374 - 74XX Series IC's
IC 7430 – 8-Input NAND Gate
The IC 7430 is a quad 8-input NAND gate, part of the 7400 series TTL logic family. It contains four independent NAND gates, each with eight inputs. This IC is used for implementing complex logic functions and processing multiple input signals, making it suitable for applications requiring high logic gate density and versatile digital circuit design.
SKU: ic-7430 - 74XX Series IC's
IC 74161 – Synchronous 4-Bit Binary Counter
The IC 74161 is a synchronous 4-bit binary counter, part of the 7400 series TTL logic family. It features synchronous counting, which means all flip-flops in the counter are clocked simultaneously. The IC includes features for counting up or down, and can be preset with specific values. It’s used in digital applications for precise counting, timing, and arithmetic operations in various electronic systems.
SKU: ic-74161 - 74XX Series IC's
IC 7414 – Schmitt Trigger Inverter
The IC 7414 is a hex inverting Schmitt trigger, part of the 7400 series TTL logic family. It contains six independent inverters with Schmitt trigger inputs, which provide enhanced noise immunity and signal stability. This IC is used in digital circuits for signal conditioning, waveform shaping, and improving reliability in noisy environments.
SKU: ic-7414 - 74XX Series IC's
IC 74124 – Schmitt Trigger Inverter
The IC 74124 is a Schmitt trigger buffer/inverter, part of the 7400 series TTL logic family. It features a single Schmitt trigger input and output, providing enhanced noise immunity and signal shaping. This IC is used to clean up and stabilize signals in digital circuits, making it ideal for converting slow or noisy input signals into clean, sharp transitions for further processing.
SKU: ic-74124 - 74XX Series IC's
IC 74123 – Dual Schmitt Trigger Monostable Multivibrator
The IC 74123 is a dual retriggerable monostable multivibrator with a clear function, part of the 7400 series TTL logic family. It can generate precise time delays in response to input pulses and can be retriggered during its output pulse. This IC is used in timing applications, pulse generation, and as a delay element in digital circuits.
SKU: ic-74123 - 74XX Series IC's
IC 7407 – Hex Buffer/Driver
The IC 7407 is a hex buffer/driver with open-collector outputs, part of the 7400 series TTL logic family. It includes six independent buffer/drivers, each with an open-collector output that can sink current but not source it. This IC is used for interfacing with external devices, driving loads, and implementing wired-AND configurations in digital circuits.
SKU: ic-7407 - Generic Integrated Circuits
IC 556: Dual Timer IC with Multiple Configurations (Pack of 2)
The IC 556 is a dual timer IC, which contains two independent 555 timer circuits within a single package. Each timer can be configured as either a monostable (one-shot) or astable (oscillator) mode, providing flexibility for various timing and waveform generation applications. The 556 is used in pulse generation, timing applications, waveform generation, and as a basic building block in electronic circuits where multiple timing functions are required.
SKU: ic-556 - 40XX Series IC's
IC 4047 – Monostable/Astable Multivibrator
The IC 4047 is a monostable/astable multivibrator, part of the 4000 series CMOS logic family. It can be configured as either a one-shot pulse generator (monostable mode) or an oscillating waveform generator (astable mode). This IC is used in timing applications, pulse generation, and waveform shaping, providing versatile functionality for various digital and analog circuits.
SKU: ic-4047 - Generic Integrated Circuits
817B Optocoupler: Phototransistor Output Optocoupler (Pack of 2)
The 817B is an optocoupler (also known as an opto-isolator) that includes an infrared LED and a phototransistor in a single package. It provides electrical isolation between input and output, protecting sensitive components from high voltages or transients. The 817B is commonly used in switching applications, signal isolation, and interfacing between different voltage levels in electronic systems. It operates with a wide range of input currents and provides reliable isolation with a typical isolation voltage of 5 kV.
SKU: 817b-optocoupler - Generic Integrated Circuits
HT12E: 16-Pin Serial Interface Encoder IC (Pack of 2)
The IC HT12E is an 8-bit addressable EEPROM-based parallel-to-serial encoder, commonly used in communication systems. It converts parallel data inputs into a serial data stream, which can be transmitted to an external decoder, such as the HT12D. The HT12E is often used in remote control systems, RF communication modules, and data transmission applications, allowing for easy encoding and communication of data between devices. It supports 8-bit data, address settings, and control functions for reliable serial communication.
SKU: ic-ht12e - IC Base
IC Base 18 Pin (Pack of 5)
The IC Base 16 Pin is a socket designed to hold and connect integrated circuits (ICs) with 16 pins. It provides a secure and reliable interface for inserting and removing ICs, protecting the ICs from damage and making them easier to replace. Ideal for prototyping and circuit design, it ensures stable electrical connections and simplifies testing and modifications in electronic projects.
SKU: ic-base-18-pin-1 - 40XX Series IC's
IC 4001 – Quad 2-Input NOR Gate
The IC 4001 is a quad 2-input NOR gate integrated circuit, part of the 4000 series of CMOS logic chips. It contains four independent NOR gates, each with two inputs. This IC is used in various digital logic applications, including signal processing and logic gate functions, providing versatility and reliability in electronic circuit design.
SKU: ic-4001 - Generic Integrated Circuits
IC ULN2803 – Octal Darlington Transistor Array (Pack of 2)
The IC ULN2803 is an 8-channel high-voltage, high-current Darlington transistor array. It consists of eight independent Darlington pairs, each with a common emitter and collector, designed to drive high-current loads. This IC is used for interfacing with high-power devices, such as relays, lamps, and motors, from digital logic circuits, providing protection and amplification for signal control in various electronic applications.
SKU: ic-uln2803 - Generic Integrated Circuits
IC TDA2030 – Audio Amplifier
The IC TDA2030 is a high-performance audio power amplifier, designed for use in low-frequency audio applications. It provides up to 14 watts of output power with low distortion and high stability. The TDA2030 is commonly used in audio amplifier circuits for driving speakers in consumer electronics, such as stereo systems and amplifiers, delivering clear and robust sound quality.
SKU: ic-tda2030 - Generic Integrated Circuits
IC LM224: Quad Low-Power Operational Amplifier (Pack of 2)
The IC LM224 is a quad operational amplifier similar to the LM324, but designed for a wider supply voltage range and higher performance. It includes four independent, high-gain, internally frequency-compensated op-amps, capable of operating on dual or single power supplies. The LM224 is used in various analog signal processing tasks, including amplification, filtering, and signal conditioning, and is well-suited for applications requiring higher precision and flexibility in signal processing.
SKU: ic-lm224 - Generic Integrated Circuits
IC DS1307: Real-Time Clock (RTC) with I2C Interface (Pack of 2)
The IC DS1307 is a real-time clock (RTC) with an I2C interface, used for keeping accurate time and date in electronic systems. It includes a built-in oscillator and can maintain time even when the main system power is off, using a backup battery. The DS1307 provides time and date information with seconds, minutes, hours, day, date, month, and year, and is commonly used in applications requiring precise timekeeping, such as clocks, data loggers, and various embedded systems.
SKU: ic-ds1307-rtc - 45XX Series IC's
IC CD4511 – BCD to 7-Segment Latch/Decoder/Driver (Pack of 2)
The IC CD4511 is a BCD to 7-segment latch/decoder/driver. It converts binary-coded decimal (BCD) input into a format suitable for driving a 7-segment display, while also including latch functionality to hold the output state. This IC is used in digital displays to show numerical values, making it ideal for applications like digital clocks, counters, and numeric displays.
SKU: ic-cd4511 - Generic Integrated Circuits
IC CA3140: High-Slew Rate Operational Amplifier
The IC CA3140 is a high-performance operational amplifier (op-amp) with a JFET input stage, designed for precision analog applications. It offers high input impedance, low offset voltage, and low bias current, making it suitable for use in high-precision signal conditioning, filtering, and amplification tasks. The CA3140 is commonly used in applications where high accuracy and stability are required, such as in instrumentation and audio processing systems.
SKU: ic-ca3140
