Shop
Showing 265–288 of 302 resultsSorted by popularity
-
B.Tech Diploma Mini Projects
Binary Encoder
The Binary Encoder project converts decimal inputs into binary outputs. Using a set of switches or inputs, the encoder generates a binary code corresponding to the active input. This binary code is then displayed or processed by digital systems. This project showcases basic digital encoding principles, demonstrating how to translate multiple input states into a binary format.
SKU: binary-encoder-project -
B.Tech Diploma Mini Projects
LED Chaser
The LED Chaser project creates a visual effect where LEDs light up in a sequential pattern, resembling a moving wave or “chase.” Using a 555 timer IC or a dedicated LED chaser IC, the circuit generates a timed sequence that activates LEDs one by one. This project is popular for creating dynamic light displays and demonstrates basic sequential logic and timing in electronics.
SKU: led-chaser-project -
B.Tech Diploma Mini Projects
Zener Diode as Voltage Regulator
Click Here to Download the Circuit Diagram of “Zener Diode as Voltage Regulator”
The Zener Diode as a Voltage Regulator project involves using a Zener diode to maintain a stable output voltage across varying input voltages. The Zener diode operates in reverse breakdown mode, where it maintains a constant voltage (the Zener voltage) regardless of changes in input voltage or load conditions.
In this project, a Zener diode is connected in reverse bias across a load resistor. When the input voltage exceeds the Zener voltage, the diode starts conducting and clamps the output voltage to the Zener voltage. This configuration ensures a stable and regulated output voltage, making it ideal for powering sensitive electronic circuits. Proper heat dissipation and current limiting resistors are essential for optimal performance and reliability.
SKU: zener-diode-as-voltage-regulator-project -
Crystal Oscillator's
Crystal Oscillator Combo Pack – 3.5 to 16 MHz (7 Frequencies)
This Crystal Oscillator Combo Pack is ideal for electronics hobbyists, students, and engineers working on embedded and microcontroller-based projects. The pack includes 7 commonly used frequencies: 3.5 MHz, 4 MHz, 8 MHz, 10 MHz, 11 MHz, 12 MHz, and 16 MHz, making it versatile for various applications such as clock generation, timers, and serial communication.
Each crystal provides stable and precise frequency output, essential for accurate microcontroller operation. These oscillators are compatible with popular platforms like Arduino, 8051, PIC, and AVR, and can be used on both breadboards and PCBs.
Pack Contents (2 pcs each):
3.5 MHz, 4 MHz, 8 MHz, 10 MHz, 11 MHz, 12 MHz, and 16 MHz.Features:
-
High accuracy and low power consumption
-
Compact size, easy to integrate
-
Suitable for learning, prototyping, and industrial use
SKU: Crystal Oscillator Combo Pack -
-
Sensors and Modules
MQ4 Sensor
The MQ4 Sensor detects methane and other gases with high sensitivity. Operating at 5V, it’s ideal for gas leak detection and environmental monitoring. It offers a quick response and requires calibration for accuracy. Used in home safety, industrial safety, and environmental monitoring, it provides reliable analog output for various applications.
SKU: mq4-sensor -
Transistors
Transistor BC369 (Pack of 5)
The BC369 is a high-frequency NPN bipolar junction transistor (BJT) used in electronic circuits for various applications. It features:
- Type: NPN
- Maximum Collector-Emitter Voltage (Vceo): 45V
- Maximum Collector-Base Voltage (Vcbo): 50V
- Maximum Emitter-Base Voltage (Vebo): 5V
- Collector Current (Ic): 800mA
- Power Dissipation (Ptot): 500mW
- Current Gain (hFE): Typically between 40 and 320 (at Ic = 50mA)
The BC369 is well-suited for high-frequency and low-noise applications, including RF amplification and switching. Its wide range of gain and voltage handling makes it a versatile choice for various electronic circuits.
SKU: transistor-bc369 -
Transistors
Transistor BC368 (Pack of 5)
The BC368 is a high-frequency NPN bipolar junction transistor (BJT) designed for RF and general-purpose applications. It features:
- Type: NPN
- Maximum Collector-Emitter Voltage (Vceo): 45V
- Maximum Collector-Base Voltage (Vcbo): 50V
- Maximum Emitter-Base Voltage (Vebo): 5V
- Collector Current (Ic): 800mA
- Power Dissipation (Ptot): 500mW
- Current Gain (hFE): Typically between 40 and 320 (at Ic = 50mA)
- Transition Frequency (fT): 120 MHz
The BC368 is suitable for high-frequency and low-noise applications, including RF amplification and signal processing. Its high current gain and good frequency response make it a versatile choice for a range of electronic circuits.
SKU: transistor-bc368 -
Transistors
BTA16 TRIAC for AC power control (Pack of 5)
The BTA16 is a widely used TRIAC for AC power control with the following key specifications:
- Type: TRIAC
- Maximum Repetitive Peak Off-State Voltage (Vdrm/VRRM): 600V
- Maximum RMS On-State Current (I(T(RMS))): 16A
- Maximum Average On-State Current (I(T(AV))): 16A (with adequate heat sinking)
- Gate Trigger Voltage (Vgt): 1.2V to 2.5V
- Gate Trigger Current (Igt): 5mA
- Maximum On-State Voltage (Vtm): 1.8V (at I(T) = 16A)
- Package Type: TO-220, TO-218, or similar
The BTA16 is commonly used in various applications such as motor control, light dimmers, and heating control due to its high current and voltage handling capabilities. It is designed for use in phase control and other switching applications involving AC loads.
SKU: bta16 -
40XX Series IC's
IC 4001 – Quad 2-Input NOR Gate (Pack of 2)
The IC 4001 is a quad 2-input NOR gate integrated circuit, part of the 4000 series of CMOS logic chips. It contains four independent NOR gates, each with two inputs. This IC is used in various digital logic applications, including signal processing and logic gate functions, providing versatility and reliability in electronic circuit design.
SKU: ic-4001 -
Transistors
SCR 2P4M for AC power control (Pack of 5)
The SCR 2P4M is a type of Silicon Controlled Rectifier (SCR) with the following specifications:
- Type: SCR (Silicon Controlled Rectifier)
- Maximum Repetitive Peak Off-State Voltage (Vdrm/VRRM): 400V
- Maximum RMS On-State Current (I(T(RMS))): 2A
- Maximum Average On-State Current (I(T(AV))): 2A (with appropriate heat sinking)
- Gate Trigger Voltage (Vgt): Typically 1V to 2V
- Gate Trigger Current (Igt): Typically 10mA
- Maximum On-State Voltage (Vtm): Approximately 1.6V at I(T) = 2A
- Package Type: TO-220 or similar
The SCR 2P4M is used in applications requiring controlled rectification, such as in phase control, motor control circuits, and light dimmers. Its relatively low gate trigger voltage and moderate current handling capabilities make it suitable for various AC power control tasks.
SKU: scr-2p4m -
Transistors
SK100 PNP Medium Power Transistor (Pack of 5)
The SK100 is a type of Silicon Controlled Rectifier (SCR) with the following key specifications:
- Type: SCR (Silicon Controlled Rectifier)
- Maximum Repetitive Peak Off-State Voltage (Vdrm/VRRM): 100V
- Maximum RMS On-State Current (I(T(RMS))): 1A
- Maximum Average On-State Current (I(T(AV))): 1A (with proper heat sinking)
- Gate Trigger Voltage (Vgt): Typically 0.5V to 1.5V
- Gate Trigger Current (Igt): Typically 1mA to 5mA
- Maximum On-State Voltage (Vtm): Approximately 1.5V at I(T) = 1A
- Package Type: Typically TO-92 or similar
The SK100 is used in low-power applications requiring controlled rectification and switching. It is suitable for use in small power control circuits, phase control, and switching applications.
SKU: sk100 -
Generic Integrated Circuits
IC ULN2803 – Octal Darlington Transistor Array (Pack of 2)
The IC ULN2803 is an 8-channel high-voltage, high-current Darlington transistor array. It consists of eight independent Darlington pairs, each with a common emitter and collector, designed to drive high-current loads. This IC is used for interfacing with high-power devices, such as relays, lamps, and motors, from digital logic circuits, providing protection and amplification for signal control in various electronic applications.
SKU: ic-uln2803 -
Generic Integrated Circuits
IC TDA2030 – Audio Amplifier (Pack of 5)
The IC TDA2030 is a high-performance audio power amplifier, designed for use in low-frequency audio applications. It provides up to 14 watts of output power with low distortion and high stability. The TDA2030 is commonly used in audio amplifier circuits for driving speakers in consumer electronics, such as stereo systems and amplifiers, delivering clear and robust sound quality.
SKU: ic-tda2030 -
Generic Integrated Circuits
IC LM224: Quad Low-Power Operational Amplifier (Pack of 2)
The IC LM224 is a quad operational amplifier similar to the LM324, but designed for a wider supply voltage range and higher performance. It includes four independent, high-gain, internally frequency-compensated op-amps, capable of operating on dual or single power supplies. The LM224 is used in various analog signal processing tasks, including amplification, filtering, and signal conditioning, and is well-suited for applications requiring higher precision and flexibility in signal processing.
SKU: ic-lm224 -
Generic Integrated Circuits
IC 8870: Precision Voltage Reference
The IC 8870 is a tone decoder integrated circuit. It is used to detect and decode specific frequencies in audio signals, typically for applications such as tone detection and decoding in communication systems. The 8870 can distinguish between different tones and provide a digital output corresponding to the detected tone, making it useful in systems that require frequency-based signal processing and recognition.
SKU: ic-8870 -
Transistors
IC 7906: Negative Voltage Regulator for Reliable -6V Output (Pack of 5)
The IC 7906 is a negative voltage regulator with the following specifications:
- Type: Negative Voltage Regulator
- Input Voltage (Vin): Up to 35V
- Output Voltage (Vout): -6V (fixed output)
- Output Current (Iout): Up to 1A
- Dropout Voltage: Typically 2V
- Package Types: TO-220, TO-3, and others
- Features: Short-circuit protection, thermal overload protection
The 7906 provides a stable -6V output from a higher input voltage, and it is used in circuits requiring a -6V power supply. It is often used in conjunction with positive regulators like the 7806 to create a dual power supply configuration.
SKU: ic-7906-regulator -
74XX Series IC's
IC 7475 – Dual 4-Bit Static Shift Register (Pack of 2)
The IC 7475 is a quad 4-bit static shift register with parallel load, part of the 7400 series TTL logic family. It contains four independent 4-bit shift registers that can be loaded in parallel or shifted serially. This IC is used for data storage, shifting, and manipulation in digital systems, making it ideal for applications involving data handling and sequential logic operations.
SKU: ic-7475 -
74XX Series IC's
IC 74574 – Octal D-Type Flip-Flop with 3-State Outputs (Pack of 2)
The IC 74574 is an octal D-type flip-flop with 3-state outputs, part of the 7400 series TTL logic family. It features eight independent D flip-flops, each with a data input (D), clock input (CLK), and output enable (OE) control. This IC is used for data storage, shift register applications, and as a buffer in digital circuits, providing reliable data handling and output control.
SKU: ic-74574 -
74XX Series IC's
IC 74573 – Octal D-Type Transparent Latch (Pack of 2)
The IC 74573 is an octal D-type latch with 3-state outputs, part of the 7400 series TTL logic family. It contains eight independent latches, each with a data input (D), a clock input (CLK), and a control for enabling or disabling the output (OE). This IC is used for data storage, buffering, and temporary data holding in digital systems, providing flexibility in managing and controlling multiple data lines.
SKU: ic-74573 -
74XX Series IC's
IC 74373 – Octal Transparent D-Type Latch with 3-State Outputs (Pack of 2)
The IC 74373 is an octal D-type latch with 3-state outputs, part of the 7400 series TTL logic family. It contains eight independent D latches, each with a data input (D), clock input (CLK), and output enable (OE) control. This IC is used for data storage, buffering, and temporary data holding in digital systems, providing versatile data management and control for various applications.
SKU: ic-74373 -
74XX Series IC's
IC 74247 – BCD to 7-Segment Decoder/Driver (Pack of 2)
The IC 74247 is a BCD to 7-segment latch/decoder/driver, part of the 7400 series TTL logic family. It converts binary-coded decimal (BCD) input into signals that drive a 7-segment display while also providing latching capability to hold the output data. This IC is used in digital displays to show decimal numbers, making it ideal for applications like digital clocks, counters, and numeric readouts.
SKU: ic-74247 -
74XX Series IC's
IC 74245 – Octal Bus Transceiver (Pack of 2)
The IC 74245 is an octal bidirectional buffer/driver with 3-state outputs, part of the 7400 series TTL logic family. It includes eight buffers/drivers, each with bidirectional data lines and control inputs for enabling or disabling the output. This IC is used for data bus interfacing and signal buffering, allowing for bidirectional data transfer and providing flexibility in digital circuit designs.
SKU: ic-74245 -
45XX Series IC's
IC 4541 – Dual Decade Counter (Pack of 2)
The IC 4541 is a 16-stage binary ripple counter with a built-in 16-bit shift register, part of the 4000 series CMOS logic family. It provides binary counting capabilities and can be used for frequency division, timing applications, and digital counting tasks. Its internal shift register allows for additional data manipulation and storage functions, making it suitable for complex digital applications.
SKU: ic-4541 -
45XX Series IC's
IC 4518 – Dual 4-Bit BCD Counter (Pack of 2)
The IC 4518 is a dual 4-bit binary counter with a BCD output, part of the 4000 series CMOS logic family. It includes two independent 4-bit counters that can be used for counting applications, with the ability to output binary-coded decimal (BCD) values. This IC is suitable for digital counting, frequency division, and timing applications, providing versatile functionality for various electronic projects.
SKU: ic-4518
